Aerco ProtoNode Gateway Rev 3 (with external LEDs) Manuel d'utilisateur télécharger pdf (Page 37)

AERCO ProtoNode Gateway

User Manual

OMM-0080_0H AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 Page 37 of 126

GF-129 Ph.: 800-526-0288 11/06/2014

Figure 7-2: Entering Field Server IP Address

Figure 7-3: Selecting the Log Type

Step 2: Take a Log

Press the Take Log button. While the Utility runs a few DOS prompts will flash across the

monitor. Don't click or type anything in to these DOS prompts. This step may take a few

minutes depending on the chosen Log Type and computer speed. When the Utility is

finished you will be presented with a log of events that have occurred.

Type in the ProtoNode IP address

Default IP Address is 192.168.1.24

Press here to retrieve the IP address.

Select a log type.

Press the Take Log button.

Locate where the log is saved on the PC

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 125 126

Pas de commentaire

Aerco ProtoNode Gateway Rev 3 (with external LEDs) Manuel d'utilisateur Page 37